LED Switch Controlled Blankets

    You are welcome for nindra blanket’s Microcomputer timer controller switch operation demo. if you will look over the controller switch you will observe four push button and one LED display screen. The lowest push button is for switching on or switching off the power supply. The upper push button can be used for setting of temperature or time. The third and fourth push buttons are for scrolling up and down for temperature and time option. The top most window is the led display screen showing temperature of the blanket and time.

   After spreading the Nindra Electric Heated blanket on bed please connect the power code to the power socket of 240 volt power supply output. Press the on/off push button of the nindra blanket connector switch. The green indicator led light will glow and red LED lines will start blinking in the controller switch monitor. Now press the temperature and time push button, the monitor will display time in hours and temperature in degree centigrade. Suppose now you want to set the blanket warming time to 4 Hours, after pushing the temperature and time button and at the sight of time in display screen set the time by pushing plus and minus buttons and set the desired time and leave the button till the set time stops blinking. The time is set, the controller button will switch off the power supply after lapse of the set time. As we set the warming time for four hours the power of the blanket will be switched off after four hours.

Similarly you can set the maximum warming temperature of the Nindra blanket. Suppose you want to set warming temperature to forty degree centigrade. Push the button marked temperature and time and on seeing the temperature option set the desired temperature by clicking plus or minus push buttons after the desired temperature is displayed leave the button. After blinking of display for a few seconds now the present temperature of the blanket will be displayed in the screen and the warming of blanket will start. You can observe the increase in blanket temperature in the LED screen step by step till the warming reaches the set temperature. When the blanket warming temperature reaches the set temperature the controller will automatically shut down the power supply. On dropping of the temperature from the set temperature the controller will restart the power supply till the blanket reaches the set temperature and so on the blanket will help in warm and cosy sleep. 

Normal Switch-Controlled Blankets

Nindra Electric Heated Blankets are for use by spreading over the
mattress and you may cover it with a thin cotton bed sheet and by covering the
bed with your quilt for warm up your bed. Thereafter connecting it’s both the
leads to power socket. It takes about 20-30 minutes for warming the bed. Your
bed is ready for a comfortable and warm sleep during the winter season.

Foot & Top Switch-Controlled Blankets